User`s guide

Users Guide Viper Extreme
CHAPTER 5: Printer menu
72 AP-75330  Rev. 1.0  14/01/09
5.4.1.3 Test print menu
Setup items Parameters Description
TestPrint (1/3)
Distance Adj. Check Print distance adjustment check pattern
NozzleCheck Print nozzle check pattern
Setup Print setup list
Maintenance Print maintenance list
TestPrint (2/3)
UniDir Print uni-directional adjustment pattern
BiDir300 Print bi-directional test pattern at 300 cps
BiDir400 Print bi-directional test pattern at 400 cps
BiDir480 Print bi-directional test pattern at 480 cps
TestPrint (3/3) Palette Print colour palette
TestPrint (1/3-3/3) - [CANCEL] key: shift to the previous hierarchy menu.
5.4.1.4 Media setup menu
Setup items Parameters Description
Media setting
Type Sets the media type used for test printing.
Sheet size
Sets the method of detecting the size of the media when sheet media
has been loaded.
Top feed
Sets the amount of media to be fed when printing begins. Make this
setting when using roll media.
Media cutting The method of cutting the media after printing is set here.
- [CANCEL] key: to shift to the previous hierarchy menu.