User`s guide

Users Guide Viper Extreme
CHAPTER 5: Printer menu
69 AP-75330  Rev. 1.0  14/01/09
Notes
The network settings menu is available if a network interface cable is connected.
The items on the File Management menu are displayed if a hard disk has been installed in the product.
Setup items Parameters Description
Setup menu (1/7)
Ink status
Displays the information (ink status) for each ink cassette
installed in the ink cassette slot.
Origin setting Sets the printing start position (origin) for printing data.
Test print Performs test printing.
Media setting Makes various media settings.
Setup menu (2/7)
Print mode setting Makes various print mode settings.
Command setting Makes various printer command settings.
Layout setting Makes various layout function settings.
Function setting Makes various processing printing data settings.
Setup menu (3/7)
Roll setting Makes various roll media settings.
Centronics setting Sets Centronics Interface communication mode.
Network setting Makes the settings for the network interface.
Setup menu (4/7)
Utility setting Makes various advanced function settings.
Initialize setting Returns the parameters to factory default value.
File management
Makes various settings for the processing method of the
printing data sent from the computer to the installed hard
disk.
Setup menu (5/7)
Data dump For Authorized Mutoh Service Technicians only
Ink Manager
Manages the ink configuration, smart chip management
system and other ink related settings.
Setup menu (6/7)
Head Unlock To replace the cutting blade.
Wiper clean Clean the wiper.
Tank change To replace the tank.
Tubing Flush Makes various tubing flush settings
Setup menu (7/7)
Version Check Ability to view the installed firmware version.
Area Check printed area in m²
Setup menu (1/7-7/7) -
[CANCEL] key: Cancel the setup menu, and shift to the
normal condition.
Notes
By using the software server RIP (option), some setups for printing can be set by the RIP. For details, refer
to the operation manual of the products.