User`s guide

Users Guide Viper Extreme

CHAPTER 5: Printer menu

65 AP-75330  Rev. 1.0  14/01/09

5.2.8 Cleaning

While printing, it could be possible that some nozzles drop out, in that case, perform a little, normal or

powerful cleaning.

Please follow the steps below to perform a cleaning.

When there are some missing nozzles, a cleaning must be done. Depending on the quantity of missing

nozzles and which head, a little, normal or powerful cleaning on head 1-2, head 3-4 or ALL could be done.

Step 1 : Press the [F2] key of the operation panel to shift to the cleaning menu.

Step 2 : Press the [F1] key or the [F2] key.

The product will perform following operations:

Setup items Key name Parameters Description

Cut & Feed

ALL, pump 1  pump 2

 pump 3  pump 4

Clean ALL heads or head couple one or two

F2 Little, normal, powerful Set the intensity of a cleaning

Step 3 : Press the [ENTER] key to start the requested cleaning.