User`s guide

Users Guide Viper Extreme
CHAPTER 5: Printer menu
62 AP-75330  Rev. 1.0  14/01/09
5.2.4 [F4] - Operating the pressure rollers
When you want to monitor the up and down movement of the pressure rollers follow the steps below:
Step 1 : Press the [F4] key.
The printer works as follows.
Status of the printer Operation after the [F4] key has been pressed
The pressure rollers have been lowered
The MEDIA SET lamp switches OFF.
The pressure rollers are lifted
The MEDIA SET lamp will switch on (orange).
The pressure rollers have been raised.
The MEDIA SET lamp switches ON (orange).
The pressure rollers are lowered.
The MEDIA SET lamp will switch off.
Notes
YOU CAN ALSO MONITOR THE UP AND DOWN MOVEMENT OF THE PRESSURE ROLLERS USING THE FOOT SWITCH
INSTEAD OF THE OPERATION PANEL.
5.2.5 [ENTER] - Print mode check
Use the following procedure to check the print mode currently set:
Step 1 : Press the [ENTER] key.
The operation panel displays the following information for three seconds:
N° Position Description
1 Condition Displays the printing quality
2 Interlace Displays the interlace method
3 Direction Displays the printing
Step 2 : When the printing mode display closes, the product changes to its main screen.
5.2.5.1