User`s guide
Users Guide Viper Extreme
CHAPTER 5: Printer menu
61 AP-75330 Rev. 1.0 14/01/09
5.2.3.3 Activate/ deactivate heaters.
In the main heater menu, press the [F4] key to activate or deactivate all heating elements.
In case the heating elements are activated, the display will mention SET OFF. Press the [F4] key to
deactivate the heating elements. The display will mention SET ON.
In case the heating elements are deactivated, the display will mention SET ON. Press the [F4] key to
activate the heating elements. The display will mention SET OFF.
Please note that after finishing a printing job (and no other print job is sent to the printer the heating elements
will keep their temperature for approximately 15 minutes. After 15 minutes the heating elements are
powered OFF.
The heaters will also automatically switch OFF after an idle period of 30 minutes.