User`s guide

Users Guide Viper Extreme
CHAPTER 5: Printer menu
59 AP-75330  Rev. 1.0  14/01/09
5.2.2 [F2] - Cleaning the heads
When there are some missing nozzles, a cleaning must be done. Depending on the quantity of missing
nozzles and which head, a little, normal or powerful cleaning on head 1-2, head 3-4 or ALL could be done.
Step 1 : Verify the following regarding the condition of the printer.
It is not currently printing
Step 2 : Press the [F2] key of the operation panel.
To shift to the cleaning menu.
Step 3 : Press the [F1] key or the [F2] key.
The product will perform following operations:
Setup items Key name Parameters Description
Cleaning
F1
ALL Clean all heads
Pump 1 Only clean head 2 and 3
Pump 2 Only clean head 6 and 7
Pump 3 Only clean head 1 and 4
Pump 4 Only clean head 5 and 8
F2
Little Perform a little cleaning
Normal Perform a normal cleaning
Powerful Perform a powerful cleaning
ENTER Start the cleaning cycle
Step 4 : Press the [ENTER] key to start the requested cleaning.