User`s guide

Users Guide Viper Extreme
CHAPTER 4: Preparations before printing
44 AP-75330  Rev. 1.0  14/01/09
4.2 TESTPRINTING
Follow the steps below to do a test print and confirm if your printer operates correctly.
Step 1 : Power ON the printer.
Step 2 : Load media.
Step 3 : Make sure that your printer is in normal [Ready to print] - status.
Step 4 : Go to Setup Menu 1/7 [F3] - TestPrint
Step 5 : Select which test pattern to print.
[F1]  Distance Check
Prints a pattern to check if the distance
adjustment (step) is correct. If not, you can
change it easily.
Please refer to the next chapter for more
information on how to evaluate this pattern.
[F2]  NozzleCheck
Prints a test pattern to check if there are any
nozzles missing. Depending on the amount of
missing nozzles, perform a little, normal or
powerful cleaning to regain all nozzles.
Please refer to chapter 4 for all details about
head cleaning.
ïïîîí
íì
ì
ëëêê
é
é
èè
ÐËÓÐ ï
ÐËÓÐ î
ÐËÓÐ íÐËÓÐ ì