User`s guide

Users Guide Viper Extreme
CHAPTER 3: Basics
26 AP-75330  Rev. 1.0  14/01/09
3.2 LOADING MEDIA
Please note that the label, which is located inside the left maintenance cover, also
describes the correct media loading.
Environmental
Recommended
working environment
Temperature: 19°C  26°C
Humidity: 30% to 60%, without condensation
Notes
Please note that some inks require a humidity of more than 50%, other inks can be used at 30%
humidity. Please contact your ink supplier for optimum printing conditions.
Notes
The size of the media can change at a fixed ratio according to the temperature changes of the working
environment. Before using media, place the media roll in the working environment for at least 24
hours, to have it match to the temperature of the working area.
Printing before the media could accommodate to the printing environment may cause media jams due
to slippage or creases. This also adversely affects the quality of printing.
3.2.1 Loading roll media
Be sure to read and understand the safety warnings before handling the printer.
Please refer to the Users Guide of the Unwinder / Winder 100 to know how to load roll media