User`s guide
Users Guide Viper Extreme
CHAPTER 3: Basics
25 AP-75330 Rev. 1.0 14/01/09
3.1.2 Switching the power OFF
Step 1 : Verify the following regarding the operational condition of the unit.
Performs no printing operation.
The operation panel is in a normal status.
Step 2 : Press the [POWER] key to switch the unit OFF.
Notes
If the power lamp is lit green, the power is ON. Press the key again to switch the power OFF.
[Power OFF] will be displayed for a few seconds
Notes
If pressing the [POWER] key by mistake, press the [POWER] key again.
Step 3 : The printer will perform the power OFF operation.
The operation panel displays:
All lamps and the LCD of the operation panel will switch OFF.
The product will automatically switch the power OFF.
Notes
If there are problems during the power OFF operation, the unit will display a message, and the
operation stops. If the operation stops, refer to Troubleshooting and take the appropriate actions.