User`s guide

Users Guide Viper Extreme
CHAPTER 3: Basics
24 AP-75330  Rev. 1.0  14/01/09
3.1 SWITCHING THE POWER ON/OFF
Be sure to read and understand the safety warnings before handling the printer.
3.1.1 Switching the power ON
Step 1 : Press the [POWER] key of the operation panel, to switch the unit ON.
The POWER lamp of the operation panel will light (green).
Step 2 : The unit will initial start-up operations.
Step 3 : After finishing initial start-up operations, the unit will enter the normal operating condition.
Notes
If there are any problems during the initial start-up operation, the unit will display a message and the
operation stops. If the operation stops, refer to "Troubleshooting", and take the appropriate actions.