User`s guide

Users Guide Viper Extreme
CHAPTER 7: Troubleshooting
143 AP-75330  Rev. 1.0  14/01/09
7.3 ERROR MESSAGES
This chapter explains the messages displayed both when the printer works normally and when an error
occurs, and possible solutions.
7.3.1 Status messages
The following are the status messages while the printer works normally.
Displays of the operational status
The first line of the operation panel displays following operational status.
N° Display Solutions References
1
Ready to print Waiting for the next operation. (Media has been
loaded.)
-
2
Media End The printer waits for the next operation.
(No media has been loaded into the printer.)
Refer to Media
handling
3 Receiving The printer receives data. -
4 Converting The printer is converting data. -
5 Plotting The printer prints. -
6
Warning Waste Ink
Tank
Empty the waste bottle Refer to Empty the
waste bottle
7
Warning Ink Tube Life Contact the dealer where you bought the printer or
MUTOH's technical support centre.
-
Displays of the operational status
N° Display Solutions References
1
Ink Refill **min The printer performs ink charging. Wait for a while. Refer to Installing
ink cassettes
2
During cleaning **min The printer performs head cleaning. Wait for a
while.
Refer to Head
cleaning
3
Media Initial ******** The printer performs initial setting of media.
Wait for a while. Indicates the media type setting
made.
Refer to Setting
media type
5
During washing
Wait for a while
The printer performs a head cleaning.
Wait for a while.
Refer to Changing
Ink Types