User`s guide

Users Guide Viper Extreme
CHAPTER 6: Periodical maintenance
134 AP-75330  Rev. 1.0  14/01/09
Step 8 : When the head cleaning has been completed, the printer returns to the main screen.
Notes
We advise to let the printer rest for 5-10 minutes after a head cleaning procedure. During that time, the ink
comes to a fully stabilized condition, improving print quality considerably.
Step 9 : Perform a nozzle check again and check the print head.
Notes
When there are still some missing nozzles after some cleanings, it could be possible that the ink cycle
is not completely airtight. To solve this moist the sides of the caps and perform a new cleaning.
Unlock the head with the Tubingflush menu to moisten the caps.
After moistening the caps perform another cleaning and NozzleCheck until no missing nozzles are
established any more.