User`s guide

Users Guide Viper Extreme
CHAPTER 6: Periodical maintenance
132 AP-75330  Rev. 1.0  14/01/09
6.1.4 Cleaning
You need to clean the printer periodically to keep it in best working condition.
Following are instructions for cleaning the printer.
6.1.4.1 Cleaning the outer case
(1) Cleaning frequency
Clean once a month.
(2) Cleaning procedure
Remove dust or smudges on the outer case with a soft cloth.
6.1.4.2 Cleaning the inside of the printer
(1) Cleaning frequency
Clean once a month.
(2) Cleaning procedure
The following are instructions for cleaning the inside of the printer.
Follow the steps below.
Step 1 : Open the front cover.
Step 2 : Use a soft brush to carefully clean away any dust or dirt on the pressure rollers.
Notes
Do not blow off media dust inside the printer using an air dusting machine. Doing so will cause
noise to occur from inside the printer.
Step 3 : Use a cloth soaked in cleaning liquid and squeezes it well, wipe off media dust and ink from the
platen.