User`s guide

Users Guide Viper Extreme
CHAPTER 6: Periodical maintenance
130 AP-75330  Rev. 1.0  14/01/09
6.1.3 6 monthly maintenance
6.1.3.1 Change the upper sponge at the back of the capping station
Step 1 : Power ON the printer and go to the WiperClean-Menu. This will cause the unlocking of the
carriage.
Step 2 : Remove the two screws fixing the sponge.
1 Screws to remove the capping sponge from the plate
Step 3 : Replace the sponge and tighten it again to the plate with the two screws.
1 Capping sponge
2 Plate