User`s guide

Users Guide Viper Extreme
CHAPTER 6: Periodical maintenance
128 AP-75330  Rev. 1.0  14/01/09
6.1.1.4 Clean spitting box mesh
Step 1 : Power ON the printer and go to the WiperClean-menu.
Step 2 : Press the [F2]-key to accept the carriage to move to the left side of the machine
The carriage will move to the left maintenance cover
Step 3 : Open the front cover.
Step 4 : Moisten the edges of the spitting box mesh.
Step 5 : Press the ENTER key when done. The carriage will automatically go to its home position.