User`s guide
Users Guide Viper Extreme
CHAPTER 5: Printer menu
118 AP-75330 Rev. 1.0 14/01/09
5.4.5.11 Load Pump 3 4 menu
To fill the ink lines connected to ink slots 2-3-6-7 for pump 3-4.
Notes
You can stop this ink load cycle.
Stop when the waste lines show ink discharging from the printer.
Setup items Parameters Description
InkLoad
start
Starts the ink load cycle for the selected pumps.
stop
Stops the ink load cycle for the selected pumps. If this is not chosen, the ink
load cycle takes 7 minutes.
-
After setting shift to the previous hierarchy menu.
Refer to Ink manager menu
Notes
During ink loading the operation panel returns to the ink manager menu. To stop ink loading, go back
to the start - stop / Ink Load menu.
5.4.5.12 Load All menu
Notes
You cannot stop the ink load cycle.
It takes 11 minutes and uses about 85 ml ink per ink slot.
Setup items Parameters Description
InkLoad
Yes
Starts the ink load cycle.
No
After setting shift to the previous hierarchy menu.
Refer to Ink manager menu