User`s guide
Users Guide Viper Extreme
CHAPTER 5: Printer menu
117 AP-75330 Rev. 1.0 14/01/09
5.4.5.9 Ink Load menu
Setup items Parameters Description
InkLoad
Pump 1 2
Load ink for ink slots 1-4-5-8.
Refer to "Load pump 1 2 menu.
Pump 3 4
Load ink for ink slots 2-3-6-7.
Refer to "Load pump 3 4 menu.
ALL
Load ink for all ink slots.
Refer to Load all menu.
-
After setting shift to the previous hierarchy menu.
Refer to Ink manager menu
5.4.5.10 Load Pump 1 2 menu
To fill the ink lines connected to ink slots 1-4-5-8 for pump 1-2.
Notes
You can stop this ink load cycle.
Stop when the waste lines show ink discharging from the printer.
Setup items Parameters Description
InkLoad
start
Starts the inkload cycle for the selected pumps.
stop
Stops the inkload cycle for the selected pumps. If this is not chosen, the
inkload cycle takes 7 minutes.
-
After setting shift to the previous hierarchy menu.
Refer to Ink manager menu
Notes
During ink loading the operation panel returns to the ink manager menu. To stop ink loading, go back
to the start - stop / Ink Load menu.