User`s guide
Users Guide Viper Extreme
CHAPTER 5: Printer menu
116 AP-75330 Rev. 1.0 14/01/09
5.4.5.7 Wash Pump 3 4 menu
To clean the ink lines connected to ink slots 2-3-6-7 for pump 3-4.
Notes
You can stop this cleaning cycle.
Stop when the waste lines are free from ink and are discharging a clear fluid.
Setup items Parameters Description
Wash
start
Starts the wash cycle for the selected pumps.
stop
Stops the wash cycle for the selected pumps. If this is not chosen, the wash
cycle takes 7 minutes.
-
After setting shift to the previous hierarchy menu.
Refer to Ink manager menu
Notes
During washing the operation panel returns to the ink manager menu. To stop washing, go back to
the start - stop / wash menu.
5.4.5.8 Wash All menu
Notes
You cannot stop this cleaning cycle.
It takes 11 minutes and uses about 85 ml cleaning fluid per ink slot.
Setup items Parameters Description
Wash
Yes
Starts the wash cycle.
No
After setting shift to the previous hierarchy menu.
Refer to Ink manager menu