User`s guide
Users Guide Viper Extreme
CHAPTER 5: Printer menu
115 AP-75330 Rev. 1.0 14/01/09
5.4.5.5 Wash menu
To clean the ink lines with cleaning fluid.
Notes
Always use the ink suppliers recommended cleaning fluid.
Setup items Parameters Description
Wash
Pump 1 2
Wash cycle for ink slots 1-4-5-8.
Refer to "Wash pump 1 2" menu.
Pump 3 4
Wash cycle for ink slots 2-3-6-7.
Refer to "Wash pump 3 4" menu.
ALL
Wash cycle for all ink slots.
Refer to Wash all menu.
-
After setting shift to the previous hierarchy menu.
Refer to Ink manager menu
5.4.5.6 Wash Pump 1 2 menu
To clean the ink lines connected to ink slots 1-4-5-8 for pump 1-2.
Notes
You can stop this cleaning cycle.
Stop when the waste lines are free from ink and are discharging a clear fluid.
Setup items Parameters Description
Wash
start
Starts the wash cycle for the selected pumps.
stop
Stops the wash cycle for the selected pumps. If this is not chosen, the wash
cycle takes 7 minutes.
-
After setting shift to the previous hierarchy menu.
Refer to Ink manager menu
Notes
During washing the operation panel returns to the ink manager menu. To stop washing, go back to the
start - stop / wash menu.