User`s guide

Users Guide Viper Extreme
CHAPTER 5: Printer menu
113 AP-75330  Rev. 1.0  14/01/09
5.4.5.4 Manual smart chip menu
Please refer to the next page for an overview of the colour modes.
In this mode the smart-chips are disabled. The printer does NOT recognize the ink, and does NOT keep
track of the ink consumption. When operating in this mode, the colour configuration needs to be set.
Setup items Parameters Description
Smart chip
Dye 4
2 x 4 colours Dye sub ink 2 x CMYK.
Pig 4
2 x 4 colours Pigmented sub ink 2 x CMYK.
Dye/Pig 4
Mixed setup Dye sub ink and Pigmented ink CMYK +
CMYK.
Dye6cm
1 x 6 colours Dye sub ink CMYKLcLm.
Pig 6 cm
1 x 6 colours Pigmented sub ink CMYKLcLm.
Pig 6 OG
1 x 6 colours Pigmented sub ink CMYK and 2 spot
colours.
Dye 8
1 x 8 colours Dye sub ink CMYKLcLm and 2 spot
colours.
Pig 8
1 x 8 colours Pigmented ink CMYKLcLm and 2 spot
colours.
Dye 1C1H extreme
Support for 1 colour 1 head 4 colour print modes.
Be aware, the ink cassettes must be placed as
follows: KYCMMCYK
Pig 1C1H extreme
Support for 1 colour 1 head 4 colour print modes.
Be aware, the ink cassettes must be placed as
follows: KYCMMCYK
-
After setting shift to the previous hierarchy menu.
Refer to smart-chip menu.
Notes
Dye sublimation ink must always be identified as a Dye parameter.