User`s guide

Users Guide Viper Extreme
CHAPTER 5: Printer menu
107 AP-75330  Rev. 1.0  14/01/09
5.4.4.18 Initialize setup menu
Returns parameters to the factory settings.
Setup items Parameters Description
Initialize (1/3)
All
Returns all parameters to the factory setting.
Refer to All Initialize menu
MediaSet
Returns parameters in the media setup menu to the factory
setting.
Refer to Media setup Initialize menu
PrintMode
Returns parameters in the print mode menu to the factory setting.
Refer to Printing mode initialize menu
Command
Returns parameters in the command setup menu to the factory
setting.
Refer to Command setup Initialize menu
Initialize (2/3)
Layout
Returns parameters in the layout setup menu to the factory
setting.
Refer to Layout Setup Initialize menu
Func.
Returns parameters in the function setup menu to the factory
setting.
Refer to Function setup Initialize menu
Roll media
Returns parameters in the roll media setup menu to the factory
setting.
Refer to Roll media setup Initialize menu
Interface
Returns parameters in the Centronics setup menu to the factory
setting.
Refer to Centronics Initialize menu
Initialize (3/3)
Network
Returns parameters in the network setup menu to the factory
setting.
Refer to Network Initialize menu
Utility
Returns parameters in the utility setup menu to the factory setting.
Refer to Utility Initialize menu
File management
The file management setup menu values are reset to factory
default settings.
(Only available if a hard disk is installed)
Initialize (1/3-3/3) -
 [CANCEL] key: Shifts to the previous hierarchy menu.
Refer to Setup menu