User`s guide

Users Guide Viper Extreme
CHAPTER 5: Printer menu
105 AP-75330  Rev. 1.0  14/01/09
5.4.4.16 Re-name menu
To change file name of printing data saved on the hard disk.
Notes
The re-name menu is available if a hard disk is installed.
The file name of printing data sent from the computer is always set to "TEMPFILE000".
To save transmitted image data, change the file name to a name of your choice in the Rename folder
before transmitting the next printing data.
Setup items Parameters Description
To-be-changed
file name
Characters you want to change
Operate the following keys to select the characters
you want to change.
[F1] key: To select characters you want to
change with back feed way.
[F3] key: To select characters you want to
change with forward feed way.
Characters you can use are :
A-Z or 0-9
Operate the following keys to select the to-be-
changed characters.
[F2] key: Selects to-be-changed characters with
back feed way.
[F4] key: Selects to-be-changed characters with
forward feed way.
-
[ENTER] key: Confirms setup value, shifts to the
previous hierarchy menu.
[CANCEL] key: Cancels setup value, shifts to the
previous hierarchy menu.