User`s guide
Users Guide Viper Extreme
CHAPTER 5: Printer menu
103 AP-75330 Rev. 1.0 14/01/09
5.4.4.14 Re-print menu
Set following items when you want to print printing data saved on the hard disk.
File name
Number of prints
Notes
The re-print menu is available if a hard disk is installed.
When Reprinting the printing data:
± Use media of the same size as the printing data.
The size of the printing data will be the same as the initial paper size, even if paper of a different
size has been set, the printing will start from the same printing start position.
± Use an ink configuration with the same colour and type of ink that will be used during the printing
data write.
Setup items Parameters Description
Re-print
File name
Operate the following keys to select the print file
[F1] key: to select file name with back feed way.
[F3] key: to select file name with forward feed way.
Number: 0 to 99
Operate the following keys to change the number of prints.
[F2] key: Increases the setup value.
[F4] key: Decreases the setup value.
-
[ENTER] key:
To confirm setup value.
Product starts printing.
After printing, to shift to normal condition.
[CANCEL] key: Cancels the setup value, shifts to the previous hierarchy
menu.