User`s guide

Users Guide Viper Extreme
CHAPTER 5: Printer menu
100 AP-75330  Rev. 1.0  14/01/09
5.4.4.9 Edge-to-edge printing
Notes
± When using this setting, it is important to load your media straight.
Notes
± Use this setting only when working with heavy papers. This because no media retainers can be
used.
With this feature it is possible to print at maximum mediawidth (1651 mm for a 65 Viper Extreme and 2240
mm for a 90 Viper Extreme) without any margins left and right.
Be sure that the media has been loaded symmetrically to the outer grid rolls.
OFF the default margins of 5 mm left and right are used.
-xmm set the left and right margins between 1 and 5 mm
ON EDGE there are no margins allowed --> edge to edge printing.
edgePrn not possible will be displayed when trying to print before the 0 point or beyond the max print width
The setup list also indicates the value of the edge to edge parameter.