Instruction manual

VJ-1604 QUICK REFERENCE
5 Troubleshooting 5-9
5 Troubleshooting
d. Press the [+] or [–] key to enter the number that you selected in step c.
e. Press the [Enter] key on the operation panel.
• The set value for Bi-D Quality is registered.
• "Adjust5:Bi-D quality" is displayed on the operation panel.
9. Register the setting for Bi-D Normal (two-way printing/normal mode) in the same way as in step 8.
10. Press the [Cancel] key on the operation panel several times.
• The operation panel returns to Normal.
• Alignment ends.