Instruction manual

VJ-1604 QUICK REFERENCE
3 Basic usage 3-25
3 Basic usage
3.7.2 Stopping printing operation
If you want to stop printing for some reasons, operate as follows.
1. Stop sending printing data from the computer to the printer.
2. Press the [Cancel] key on the operation panel.
• The printer operates as follows.
NOTE
NOTE
• If a large amount of data is saved on the printer, the operation panel may not
return to Normal by a single [Cancel] key operation.
In such cases, wait for a few seconds and press the [Cancel] key again.
3.7.3 Cutting media
This sub-section explains how to cut roll media.
Follow the procedure below to cut roll media.
CAUTION
• When printing is finished, the media guide is at high temperature. Wait until the media
guide cools off.
1. Verify the following regarding the operational condition of the product.
• Printing or other operations are not in progress.
• The operation panel display is Normal.
2. If the roll media cut position is changed, refer to "3.7.1 Feeding media" and advance the roll media
to the desired cut position.
Printer status Operation with the [Cancel] key pressed
During printing Terminates printing and deletes the remaining data in the printer.
Receiving/converting Delete the received/analyzed data and a file of subsequent data.