Instruction manual

VJ-1604 QUICK REFERENCE
3-18 3 Basic usage
6. Rewind the roll media a little by rolling the flange on the roll media holder while holding the edge of
the media, and eliminate any slack or slant.
NOTE
NOTE
• If you set the roll media free while rewinding, the roll media will fall out from the
media feed slot on the rear of the product.
• Confirm that the right edge of the roll media does not go beyond the loading mark.
If it does, it may affect print quality.
NOTE
NOTE
• When setting the roll media, set both sides of the media at least 5 mm away from
the edge of the pressurizing roller.
Slippage or creases may occur during printing.
No. Name
1 Roll media
2 Media loading mark
No. Name
1 Roll media
2 Pressurizing rollers
1
1
2
5mm 5mm 5mm5mm
2
1
2
1
2
1