Instruction manual

VJ-1604 QUICK REFERENCE
5 Troubleshooting 5-19
5 Troubleshooting
5.4 Error messages
This section describes messages displayed during normal printer operation or when errors occur, and
solutions to the messages.
5.4.1 Status messages
This section describes messages displayed during printer normal operation.
When the product is operating correctly, each operation status is displayed on the operation panel as
below.
No. Display Description Reference
1 Ready to Print Standby (Media is loaded).
2 Media End Standby (Media is loaded).
3.5 Setting media
3 Receiving Receiving data.
4 Converting Analyzing data.
5 Printing Under printing.
6 Warming Up Warming up the heater.
7 Cleaning **% Cleaning the head. Please wait a while.
4.2.3 Head
cleaning
8 Start Ink Charge – >E Ink filling starts. Press the [Enter] key.
3.4 Installing ink
cartridges
9 Ink Refill **% Filling the ink. Please wait a while.
3.4 Installing ink
cartridges
10 Washing Washing the print head by Head washing.
Please wait a while.
"5 Panel setup
menu" in the
Operation Manual
11 Moving Origin Pos. The print head is moving to the original
printing position in the Origin setup menu.
Please wait a while.
"5 Panel setup
menu" in the
Operation Manual
12 Confirm Position – >E The print head is moving to the original
printing position in the Origin setup menu.
Press the [Enter] key.
"5 Panel setup
menu" in the
Operation Manual
13 Remove Cartridges Washing the head.
Attach the cleaning cartridge.
"5 Panel setup
menu" in the
Operation Manual
14 ** Initialing ** Initializing the setting in the Initialization
menu. Please wait a while.
"5 Panel setup
menu" in the
Operation Manual
15 ** Press 2sec. ** The [Cleaning] key or the [Nozzle Check]
key is pressed for less than 2 seconds. Press
the key for more than 2 seconds again.
2.1.3 Operation
panel
16 Insert CleaningCart. Filling the ink.
Attach the cleaning cartridge.
"5 Panel setup
menu" in the
Operation Manual
17 Insert InkCartridges Filling the ink.
Insert an ink cartridge.
3.4 Installing ink
cartridges
18 Media: Type ** OK? Initializing the media.
Please wait a while.
(** represents the setup media type.)
"3.4.4 Setting
media type" in the
Operation Manual
19 Media Initial