User manual

ValueCut User Manual

The Control Panel 3-8

9600, n, 8, 1, p 9600pbs, 8 Bits with NO Parity

9600, o, 8, 1, p 9600pbs, 8 Bits with ODD Parity

9600, e, 8, 1, p 9600pbs, 8 Bits with EVEN Parity

19200, n, 7, 1, p 19200pbs, 7 Bits with NO Parity

19200, o, 7, 1, p 19200pbs, 7 Bits with ODD Parity

19200, e, 7, 1, p 19200pbs, 7 Bits with EVEN Parity

19200, n, 8, 1, p 19200pbs, 8 Bits with NO Parity

19200, o, 8, 1, p 19200pbs, 8 Bits with ODD Parity

19200, e, 8, 1, p 19200pbs, 8 Bits with EVEN Parity

Firmware

Version

To display the version number of Firmware and FPGA code.

Select

Language

To select displayed languages on LCM panel in English,

Spanish, Italian, Deutsch, Japanese, Portuguese, Polish,

Turkish

French

English

Select Units Provide two-unit systems for users convenient. cm/gram;

inch/oz

Metric

Scale Length

Scale Width

To adjust the scale of media length and width that

may cause

by the thickness of the media.

The Denominator is the actual length, and the Numerator is

the ideal length measured from the resultant.

For example, cutting a line with 500.0 mm length. The

procedure as follows:

1. Press the [LEFT ARROW] to choose the Numerator and

select 500.0 mm,

2. Cut the length by sending a graph file,

3. Measure the length then use the [RIGHT ARROW] key to

choose the Denominator, then

4. Press [UP ARROW /DOWN ARROW] to

change the values

of the actual length.