User guide

Setting up the cutter Operation Instructions SC Cutting Plotters
Page
2
AP-75026 Rev 1.0 - 11/01/00
UNPACKING YOUR SC CUTTER
•
When unpacking the cutter, check whether all parts described in the
parts list are included in the box. Consult your dealer if anything
seems to be missing.
•
Lifting the machine out of the box should be done by two people.
•
Protect the plotter from firm shocks.
•
Do not dismantle the unit
To unpack the cutter:
1. Lift the cutter unit out of the box and put it on a flat and stable surface.
2. Take out the accessories box.
3. Remove all plastic wrapping materials.
4. Remove the pieces of foam, protecting the tool head during transportation.
5. If you had your cutter delivered with a stand, please refer to the instructions for
mounting the stand.
WHAT’S IN THE BOX ?
What’s in the box - SC-?
•
SC plotter unit with roll support system, 2 conveyor
rolls and small guiding flanges
•
Cutting plotter stand (optional for SC-650)
•
Mutoh SC Series User guide
•
Knife holder with pre-mounted cutting blade
•
Set of 2 spare cutting blades + spring
•
Set of 2 water-based fibre tip pens
•
Spare cutting mat
•
Power Cord
•
RS-232 interface cable