Specifications
Maintenance Manual – SC Cutting Plotter
62 AP-74030, Rev / B
6.3.3. Dip switch settings on Main PC board.
MODEL POS 8 7 6 5 4 3 2 1
SC-550 OFF
ON
*
*
*
*
*
*
*
*
SC-650 OFF
ON
*
*
*
*
*
*
*
*
SC-750 OFF
ON
*
*
*
*
*
*
*
*
SC-1000 OFF
ON
*
*
*
*
*
*
*
*
SC-1300 OFF
ON
*
*
*
*
*
*
*
*
Warning :
The main PC board for SC-550 looks similar to the other ones, but can not be used in
other SC-series. (and vice versa)
The boards are labelled were they not can be used.
Warning :
After Main PC board replacement put the EEPROM (U3) from the initial board in the new
one. In this way no other adjustments or user parameters have to be reinstalled.
If for one or other reason the EEPROM (U3) need to be replaced, the following data
must be checked and if necessary readjusted. (Please refer to 3.1.1. RS-232C Pin
configuration.)