Specifications

Maintenance Manual – SC Cutting Plotter
41 AP-74030, Rev / B
2) X-Y Move.
* Diagnost – 5 *
TIME DISTANCE
XY-move General
Press F3
F3
* XY MOVE *
Aging
Shift Quality
F2
F4
Press F2
F3
* Aging *
XY
X Y
F2
F4
With this test you can make the plotter
continuously moving in the X-/Y- axis or
both axes together and the time of operation
is displayed
Press F3
F3
* Paper shift *
Start Finish F4
For this test a SHEET of paper need to be
loaded. This test checks the if the tracking
of the media remains correct during
operation
Press F4
F1
F3
* Quality *
Blocks Line45
Dashline Circle
F2
F4
For this test a SHEET of paper and a pen
need to be loaded.
This test is used to check the overall plot
quality of the machine
Before you press (F3) ‘START’, you have to position the pen to the desired place on the paper by
using the jog keys.
Press (F1) to activate the ZIG ZAG test.
Press (F2) to activate the 45° test.
Press (F3) to activate the Dash line test.
Press (F4) to activate the Circles test.
3) General (Backup plots).
F1
F3
* Diagnost – 5 *
TIME DISTANCE
XY-move General
F2
F4
Press F4
This plot requires Min A3 size paper and a pen.
F3
* Total Plot *
Backup Adjust F4 (F3) ‘Backup’ plots the USER parameters.
(F4) ‘Adjust’ plots the adjustment values.