User`s guide

User’s Guide Spitfire 65/90 Extreme
CHAPTER 4 :Periodical maintenance
55 AP-75197– Rev. 1.2
Step 8 : When the head cleaning has been completed, the printer returns to the main screen.
Notes
We advise to let the printer rest for 5-10 minutes after a head cleaning procedure. During that
time, the Spitfire ink comes to a fully stabilized condition, improving print quality considerably.
Step 9 : Perform a nozzle check again and check the print head.
Notes
When there are still some missing nozzles after some cleanings, it could be possible that the
ink cycle is not completely airtight. To solve this moist the sides of the caps and perform a new
cleaning.
Moistening the caps can be done by unlocking the head with the TubingFlush menu.
After moistening the caps perform another cleaning and NozzleCheck until no missing nozzles
are established any more.