User`s guide

User’s Guide Spitfire 65/90 Extreme
CHAPTER 4 :Periodical maintenance
51 AP-75197– Rev. 1.2
4.1.3.3 Repla cing th espong ein th espitting box.
Notes
Use gloves and tweezers to change the absorbent in the flushing box.
Step 1 : Unlock the head
Notes
Following display will appear.
After job is done, press the ENTER key, and the head will lock again.
Step 2 : The carriage moves to the waiting position for replacing the flushing sponge.
Step 3 : Remove the old absorbents with tweezers.
1 Sponge (KY-42889)
2 Tweezers
3 Gloves
Step 4 : Install the new absorbents in the flushing box. Make sure that the 2 holes are on the right side of
the flushing box and that the pins of the black box are in the holes of the absorbent.
1 Two holes
2 Pin of black box
Step 5 : Lock the head.