User`s guide

User’s Guide Spitfire 65/90 Extreme
CHAPTER 4 :Periodical maintenance
49 AP-75197– Rev. 1.2
4.1.3 Monthly Maintenance
4.1.3.1 Repla cing th ew ipers
Step 1 : Power ON the printer and go to the WiperClean-Menu. This will cause the unlocking of the
carriage.
Step 2 : Slide the carriage to the left side of the machine.
Step 3 : Remove the old wipers with a pair of tweezers
Step 4 : Before inserting a new wiper, moisten the wiper with Spitfire Cleaning Liquid.
Step 5 : Insert the moistened wiper with a pair of tweezers.
Be sure to insert the wiper
correctly as shown below:
When standing in front of
the machine.
Be sure that the wiper clicks in the wiper
holder!
Step 6 : Close the front cover and press the [ENTER] key. The head will cap in.
Notes
Be careful not to break the lips of the wiper arm while installing the wipers.
Do not touch the wipers with your bare hands to avoid fat or dirt get in contact with the wipers
and automatically the nozzle plate. Use a pair of tweezers to avoid this. Clean wipers with
appropriate cleaning liquid in case of dirt.