User`s guide

User’s Guide Spitfire 65/90 Extreme
CHAPTER 4 :Periodical maintenance
44 AP-75197– Rev. 1.2
4.1 DONE BY END USER
Caution
In case of working with other inks than described in this manual, refer to the instruction sheet
enclosed with the ink to know the periodical maintenance and its frequency.
This section describes the periodical services required for this machine. The periodical services ensure
stable printout quality of the machine. In the periodical services, some service parts may be checked,
cleaned, or replaced.
Perform periodical inspections according to the table below.
N° Action Frequency
1 Clean wipers Morning and evening
2 Flush caps in maintenance station
Daily maintenance
3 Clean the edges of the caps in maintenance station
4 Clean the area around the caps
Weekly maintenance
5 Clean around bottom of the heads
6 Replacing the sponge in the spitting box 2 weekly maintenance
7 Change the wipers
Monthly maintenance
8 Change upper sponge at the back of the capping station
Notes
The accessory kit, delivered with the printer, contains items to perform the periodical
maintenance (except for cleaning liquid).
If running out of the necessary maintenance equipment, a user maintenance kit can be ordered.
This kit contains all items to perform the periodical maintenance.
Depending on the ink you are currently using, order the correct cleaning liquid.
Notes
Above maintenance cycle is based on use:
8 hours / day, 5 days / week and 44 weeks / year.
If machine is used more, maintenance periods will come earlier.