User`s guide

User’s Guide Spitfire 65/90 Extreme
CHAPTER 2: Product overview
18 AP-75197– Rev. 1.2
2.1 PRINTER
Part names and functions are explained below.
2.1.1 Front
N° Name Function
1 Heater plate Supports and heats the media during printing.
2 Front cover
Keeps the operator safe from the drive parts of the printer while it is
operating. Only open and/or close the cover to perform following
operations:
Media setting and replacement
Cutter blade replacement
Cleaning the cleaning wiper
3 Carriage Drives and holds the print heads.
4 Operation panel To control the printer.
5 Ink compartment cover Covers the ink compartment.
6 Stand Carries the main body.
7 Waste bottle assembly Collects the waste fluid.
8* Winder Rolls up the roll media.
9* Front tension system Keeps the media under tension.
10 Left maintenance covers Covers the maintenance areas.
*
Only applicable when having an unwinder/winder 100 installed