User`s guide

User’s Guide Spitfire 65/90 Extreme
CHAPTER 6 : PRINTER MENU
123 AP-75197– Rev. 1.2
6 .6 .5.4 InkLoa dm enu
Start and stop an ink load.
Setup items Parameters Description
Ink Load Pump 1 Load ink into head 1 and 2
Pump 2 Load ink into head 3 and 4
ALL Load ink for complete system
-  [CANCEL] key: shift to the previous hierarchy menu.
6 .6 .5.5 InkC h a ng em enu
Change the ink configuration (from 2x4 to 1x6 or opposite).
Setup items Parameters Description
Ink Change No Do not perform an ink change.
Yes To start the ink change cycle.
-  [CANCEL] key: shift to the previous hierarchy menu.
Notes
To reduce the consumption of ink and cleaning liquid it is recommended to change ink types
by using the ‘Ink Change’ cycle.
The process consists of several cleaning loadings, several air loadings and one ink loading. On the display
of the operation panel a time indication is mentioned on the fourth line.
Message Time
Please remove cart. (*)
Ink Discharge (*) 1
Please insert Cleaning cart (*)
During washing wait for a while (*) 5
Remove cassettes
During washing wait for a while 6
Please insert ink cart.
Ink refill 9
The end
(*) = This will be asked 5 times.