User`s guide

User’s Guide Spitfire 65/90 Extreme
CHAPTER 6 : PRINTER MENU
114 AP-75197– Rev. 1.2
6 .6 .4.10 S la ntC h eckM enu
To enable or disable whether the printer performs a slant check after every print of at least 1 meter.
Setup items Parameters Description
SlantCheck Off No SlantCheck
On Perform SlantCheck
Autocorrect When a slant check is performed with an auto correction, the
next print files are repositioned against the new media position.
This will improve the comfort level for unattended printing.
- [CANCEL] key: shift to the previous hierarchy menu.
6 .6 .4.11 Rem P a nel
With this function it is possible to enable or disable remote control. This feature is for future use only! Leave
this setting to its default value, OFF!
Rem oteconnection
This feature is for future use only! Leave this setting to its default value, OFF!
La ng ua g e
With this function it is possible to select other languages. Currently only English is available
C a pskip
CapSkip is enabled and a print job is finished, capin is postponed with about 15s, to allow a new printjob to
start immediately, without capin/capout cycle. Default value is OFF