Specifications

Operation Instructions Spitfire 65/90 Extreme
CHAPTER 4 : PERIODICAL MAINTENANCE
47 AP-77140 – Rev. 1.1 – 05/04/07
4.2 DONE BY AUTHORISED MUTOH TECHNICIAN
An Authorized Mutoh technician should check and replace some components of your printer on frequent
base (every 6 and 12 months).
Be sure to remind your distributor when the replacements should be done.
It is very important not to skip a maintenance intervention in order to maintain constant print quality and to
keep your warranty.
Please refer to the table below to know what the Authorized Mutoh technician should do.
N° Action
10 Change dampers
11 Change pumps (*)
12 Change tubes from pumps -> Waste bottle
13 Change spitting box + tube + L connection
14 Change capping station
15 Change cap assembly maintenance station
16 Apply grease on head up-down cams when needed
17 Apply grease on Y-motor belt when needed
18 Apply grease on roller path – carriage when needed (**)
19 Apply grease on capping station camm + gears when needed
20 Dust removal in fan area underneath print platform
Month Maintenance
Cycle
1 2 3 4 5 6 7 8 9 10 11 12
10
x x
11
x x
12
x x
13
x x
14
x
15
x
16
x x
17
x x
18
x x
19
x x
20
x x
Notes
• All cleaning in “Ink areas” must be done with Spitfire Mild Solvent cleaning.
• Above maintenance cycle is based on use:
8 hours / day, 5 days / week and 44 weeks / year.
If machine is used more, maintenance periods will come earlier.
Available kits for Authorized Mutoh Technicians only and their part numbers:
maintenance cycle Kit 6 months KY-80226
maintenance cycle kit 12 months KY-80227