User`s guide

User’s Guide SC-PRO Cutting Plotter

CHAPTER 4 : WALKTHROUGH THE OPERATION PANEL

AP-75280 – Rev. 1.2

4.2.14 Language

Select in the language of the user interface.

Language

ENGLISH

Save: Exit:

Language ENGLISH

ESPANOL

DEUTSCH

FRANCAIS

NEDERLANDS

ITALIANO

POLSKI

4.2.15 Emulation

Your cutter is able to understand different graphic languages. It is highly recommended to leave this setting

unchanged.

Emulation

HPGL2

Save: Exit:

Emulation HPGL2

Default graphic language

MHGL For internal use only

MHGL2 For internal use only

HPGL For internal use only

4.2.16 Program step

Please note that some software packages use the “step per mm” terminology, in which case a program step

of 0.025 mm corresponds with 40 steps per mm and a program step of 0.010 mm with 100 steps per mm.

Contour cutting supports only 0.010 mm program step.

Notes

If the plot unit is not set correctly, all your cutting jobs will be cut 2.5 times too large or too small.

Program step

0.010

[mm]

Save: Exit:

Program Step 0,010mm

Set the step to 0.010 mm

0,025mm Set the step to 0.025 mm