User`s guide

User’s Guide SC-PRO Cutting Plotter
CHAPTER 4 : WALKTHROUGH THE OPERATION PANEL
41 AP-75280 – Rev. 1.2
4.1.5 SPEED key
Please follow the instructions below to change / control the cutting speed.
Step 1 : Press the [SPEED] key.
Step 2 : The current speed (in cm/s) will be displayed. Change the value with the - keys.
Speed
60
[cm/s]
Start: Exit:
Step 3 : Press the [ ] key to change the current value or the [ ] key to abort.
Notes
The speed can be viewed / changed in following modes:
o READY mode
o BUSY mode
o PAUSE mode
Notes
The cutting speed, tool up or laser speed are independent and different settings.