User`s guide

User’s Guide SC-PRO Cutting Plotter
CHAPTER 3 : BASICS
23 AP-75280 – Rev. 1.2
3.1.3 Replace auto sheet-off knife
When you frequently use the auto-sheet-off utility, it is a good practice to regularly clean the knife and to
replace it when it starts to wear.
To replace the auto sheet-off knife, please follow the instructions mentioned below.
Step 1 : Power OFF the unit and remove the power cable.
Step 2 : Remove the 2 screws fixing the head cover.
Step 3 : Higher the cutter cap (1) and swing it away (2). Do not loosen the spring.
Step 4 : Remove the sheet-off knife (3).
Step 5 : Clean the sheet-off knife, removing any material residues that might be clogged to the blade. In
case the blade is worn, reinstall a new knife.
Step 6 : Place the (new) knife into the auto sheet-off assembly (4). Make sure the knife is correctly
oriented.
Step 7 : Reinstall the cutter cap onto the auto sheet-off knife.
Step 8 : Reinstall the head cover.