User`s guide

User’s Guide SC-PRO Cutting Plotter
CHAPTER 2 : PRODUCT OVERVIEW
19 AP-75280 – Rev. 1.2
2.3.3 Operation panel
BASIC KEYS
1
MENU key
To enter the main menu of the cutter
2
ENTER key
To open a menu item or to confirm a setting
3
EXIT/CANCEL key
To exit a menu item, to decline a setting or to cancel a cutting job.
4
RESUME / PAUSE key
To interrupt or resume a cutting job
5
UP / YES key
This key has multiple functions
o Browse through the main menu
o Increase a value
o Confirm a setting
6
DOWN / NO key
This key has multiple functions
o Browse through the main menu
o Decrease a value
o Decline a setting
7
MEDIA TYPE key
To select the media type
o Sheet media initialization: front – rear – left – right
o Roll front media initialization: front – left – right
o Roll media initialization: left - right
8
ARROW key
To move the media forwards and backwards
To move the cutter head to the left or right
DIRECT KEYS
9
SHEET OFF key
To enter the sheet off mode
10
TEST key
To enter the test menu
11
ORIGIN key
To enter the origin menu
12
CONTOUR CUTTING key
To enter the contour cutting menu
13
SPEED key To enter the speed menu
14
OFFSET key To enter the offset menu
15
FORCE key To enter the force menu
16
TOOL key To enter the tool menu
LED’s
17
SHEET LED
Lights up when selecting SHEET with the [MEDIA TYPE]-key.
18
ROLL FRONT LED
Lights up when selecting ROLL FRONT with the [MEDIA TYPE]-key.
19
ROLL LED
Lights up when selecting ROLL with the [MEDIA TYPE]-key.
20
ORIGIN LED
Lights up when an origin is set by the user.
Blinks when you are busy setting the origin.
21
CONTOUR CUTTING LED
Light up while contour cutting.
Blinks when the cutter is measuring the reference box.