User`s guide

User’s Guide SC-PRO Cutting Plotter
CHAPTER 2 : PRODUCT OVERVIEW
17 AP-75280 – Rev. 1.2
2.3 PART NAMES AND FUNCTIONS
2.3.1 Front of the SC-PRO
N° Part Function
1
Bumper
To avoid the head crashing against the side and to measure the width of
the machine during initialization.
2
Media guide To guide the media when moving front and backwards.
3
Cutting groove A groove to guide a knife to sheet of the media manually.
4
Cutting head Assembly of cutting knife, sheet-off knife and EPOS sensor.
5
Cutting mat Provides a reliable cutting surface and minimizes damage to the knife tip.
6
Pressure rollers To hold the media against the grid rollers.
7
Small grid rollers
Rollers with a lot of grip to move the media along front and backwards
There is 1 large one and 13 small ones.
8
Large grid roller
9
Control panel Removable panel with LCD display and control keys.
10
Tool storage holes Holes in the right cover to store 3 tools.
11
Pressure roller lever
To lower or raise the pressure rollers. Note that all sent data will be
removed out of the buffers when raising the lever.
12
Media collection bag Bag to collect the media when sheeted-off.
13
Caster wheels To move the cutter easily or to fix the stand using the brakes.
1
2 3
4
5 6
7
8 9
10
12
13
11