User`s guide

User’s Guide SC-PRO Cutting Plotter
CHAPTER 2 : PRODUCT OVERVIEW
15 AP-75280 – Rev. 1.2
2 PRODUCT OVERVIEW
2.1 DIMENSIONS
Please find below the sizes of the SC Pro cutter with all dimensions in millimetres.
2.2 INSTALLATION ENVIRONMENT REQUIREMENTS
The location where you set up your equipment is very important. Please see to it that it meets following
conditions:
Power supply
• 100 - 240 VAC
• 50 - 60 Hz
• Max. 1.5 A
Ambient Conditions
Operating environment
:
• Temperature 5 °C to 30 °C
• Humidity 35 % - 75 % non-condensing
Recommended environment (dark area)
• Temperature 16 °C to 25 °C
• Humidity 50 % to 65 % non-condensing
Variation rate
• Temperature 2 °C per hour
• Humidity 5 % per hour
Storage environment
• Temperature 0 °C to 50 °C
2305 1062
1259
662