User`s guide

Handling Roll Media – User’s Guide
83
AP-75100, Rev. 2.0, 26/11/04
4.6 CALIBRATION OF THE UNWINDER / WINDER 100
4.6.1 Calibration of the rear rear tensioning system
Step 1 : Standing on the rear side of the unit, use some tape to create a loop around the up-most left side
of one bar of the tension system.
Step 2 : Put the pressure rollers in the up position.
Step 3 : Slide the strip forwards.
Step 4 : Pull the strip so there is an equal tension.