User`s guide

Handling Roll Media – User’s Guide

AP-75100, Rev. 2.0, 26/11/04

4.4.3. Positioning of the unit

After installation of the unwinder / winder 100, please make sure to lock the unit.

Please choose an adequate place for your printer. (Please refer to the User’s Guide)

Step 1 : First move the printer to where it will be installed.

Step 2 : Lock the casters.

Step 3 : Rotate the four adjusters to make the printer stable.

Step 4 : In the middle of both rail assemblies, rotate the adjuster to make the rail assemblies stable.

Step 5 : Jiggle the printer to make sure that it stable.

Notes :

Note that an 87” printer has 3 adjusters.