User`s guide

Handling Roll Media – User’s Guide
70
AP-75100, Rev. 2.0, 26/11/04
Step 7 :
Assemble the rear tensioning system, using 2 screws M4x10. Put a lock washer M5 between each screw and tensioning system shaft.
TIGHTEN THE SCREWS FIRMLY
After assembling the front and rear tensioning system, tighten the bolts on the left support bracket.
ITEM PART DESCRIPTION QUANTITY
1 Lock Washer External Teeth M5 ELVZ 4
2 Pan Head Screw M4x10 4
3 Rear tensioning system assy Rollfeed Rockhopper II 87” 1
4 Front tensioning system assy Rollfeed Rockhopper II 87” 1