User`s guide

Handling Roll Media – User’s Guide
53
AP-75100, Rev.2.0, 26/11/04
4.3.2. Turning the power ON / OFF
The methods to turn the power ON or OFF are described below.
4.3.2.1. Turning the power ON
Turn the power of the unit ON according to the following procedure.
Step 1 : Turn the power switch ON.
¾ The product turns the power ON.
¾ The power lamp on the operation panel will light.
1. Power switch
When using the unwinder / winder 100, please make sure to select the option “Rollfeed”.
* Detection *
F1 →
Normal Off
← F2
F3 →
TakeupRoll RollFeed
← F4
Current parameter →
- Rollfeed - (1/1)
Setup items Parameters Description
media detect RollFeed Make this setting when using the optional winder /
unwinder 100
4.3.2. Turning the power OFF
Turn the power OFF according to the following procedure.
Step 1 : Make sure the product is not winding.
Step 2 : Turn the power switch OFF.
¾ The product turns the power OFF.
¾ The power lamp on the operation panel will turn off.
1. power switch